侧开式管夹允许在不断开设备或中断操作的情况下安装到管道上。
• 采用耐用尼龙制成,使用寿命长,耐化学腐蚀性好
• 可接受外径不超过6.4mm(1/4“)的任何管道Bel-Art Nylon Screw-Clamp Compressor for Tubing up to ¼ in. O.D.Side opening tube clamp permits installation onto tubing without disconnecting from apparatus or interrupting operation.
• Constructed of durable nylon for..
带氯丁橡胶阀盘的聚丙烯塑料阀在压力中断时阻止液体反向流动。
• 将真空管路连接至过滤瓶时非常有用
• 建议最大压力20psi(1034托)
• 可高压灭菌Bel-Art Check Valves; ¼ to ⅜ in. Tapered End Diameter, Polypropylene (Pack of 6)Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.
• Useful when connecting a ..
各种尺寸适合内径为3至12mm(⅛至½“)的管子,可组合成不同直径。
• 由两个带倒钩的聚乙烯塑料连接器组成,这些连接器与一个公锥-母锥紧密组装在一起。
• 在连接和断开真空管路和其他管道组件时非常有用
• 所有尺寸均可与其他尺寸互换,以实现变径组合
• 工作温度高达80ºC(176ºF)Bel-Art Mix and Match Quick Disconnects for ¼ to ⁵⁄₁₆ in. Tubing; Polyethylene (Pack of 12)Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D ..
各种尺寸适合内径为3至12mm(⅛至½“)的管子,可组合成不同直径。
• 由两个带倒钩的聚乙烯塑料连接器组成,这些连接器与一个公锥-母锥紧密组装在一起。
• 在连接和断开真空管路和其他管道组件时非常有用
• 所有尺寸均可与其他尺寸互换,以实现变径组合
• 工作温度高达80ºC(176ºF)Bel-Art Mix and Match Quick Disconnects for ⅛ to ¼ in. Tubing; Polyethylene (Pack of 12)Full range of sizes fit tubing from 3 to 12mm (⅛ to ½") I.D and..
提供开/关和精确的控制,在许多应用中它取代了旋塞阀。
• 无需断开管道或中断操作即可安装
• 可接受外径高达14mm(½“)的挠性管
• 缩醛塑料模制;可高压灭菌
• 耐酸、碱和有机溶剂Bel-Art Screw Style Tubing Clamps for Tubing up to ½ in. O.D. (Pack of 3)Offers on/off and fine control so accurate that it replaces stopcocks in many applications.
• Can be installed without disconnecting ..
Molded polyethylene plastic parts snap together forming a tight seal, and the free-turning key needs no lubrication.• A quarter turn shuts off flow
• Maximum pressure rating 48 KPa (7 psi), 489cm of water..
Molded polyethylene plastic parts snap together forming a tight seal, and the free-turning key needs no lubrication.
• A quarter turn shuts off flow
• Maximum pressure rating 48 KPa (7 psi), 489cm of water..
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..
Polypropylene plastic valve with neoprene valve disk stops reverse flow of liquid when pressure is interrupted.
• Useful when connecting a vacuum line to a filter flask
• Recommended maximum pressure 20psi (1034 Torr)
• Autoclavable..