Bel-Art Vibrasorb高级减震底座；18 x 22 x 3英寸。

Vibrasorb®减震底座有助于优化使用，并有助于保护机电和光学设备，使其免受因振动而导致的过度磨损甚至结构损坏。

• 抛光表面能抵抗划痕和化学侵蚀

• 6.4cm（2½“）厚平台；由致密黑白水磨石制成

• 四个减振器™ 带氯丁橡胶脚垫，支持高达16公斤（35磅）

• 较大尺寸将吸收16kg（35lb）荷载下13 Hz的振动；较小尺寸将吸收16 Hz以下的振动。负载16kg（35lb）

• 负载较轻时，两种尺寸的最小阻尼频率将增加到16赫兹之间。25赫兹

• 装运重量：大号39kg（87lb），small 19kg（42lb）

Bel-Art Vibrasorb Premium Vibration Damping Mount; 18 x 22 x 3 in.

Vibrasorb® Vibration Damping Mounts facilitate optimal use and help protect electromechanical and optical equipment from excessive wear and even structural damage that can be caused by exposure to vibration.

• Polished surface resists scratches and chemical attack

• 6.4cm (2½") thick platforms; molded of dense black & white terrazzo

• Four Vibro-Absorber™ cushions with neoprene feet support up to 16kg (35 lb)

• Larger size will absorb vibrations down to 13 Hz with a 16kg (35lb) load; smaller size will absorb vibrations down to 16 Hz. with a 16kg (35lb) load

• With lighter loads, the minimum frequency of damping for both sizes will increase to a value between 16 Hz. and 25 Hz

• Shipping weights: large 39kg (87lb), small 19kg (42lb)